hydrofix

MAMMOTH P Microbes bud enhancer cannabis nutrients

Growers choice cannabis led grow lights

Hi Folks, Not sure if this question belongs here or in Newbie Central but thought I'd try here first. Just starting my second grow, and I'm doing Hempy Buckets this time around. First grow was soil and I have a container of +LIFE (Veg+Bloom ) kicking about. Would Hempy Buckets benefit from using microbial inoculants such as this, or is that primarily for soil-based grows? Cheers! from Hydroponics / Aeroponics read more

I have been looking around for a good ec meter that i can rely on. I have seen in a lot of youtube videos people using bluelabs. I currently have an Apera EC20 and while it feels like a good product i dont know if i trust the readings. I calibrated it like 1 week ago and today it was off by like 20 to 30 points , aka i tested my nuts water before calibration and it was at 1213 then after calibrating it i got 1175. i dont know if this amount of swing is acceptable or not. Oh and i also... What EC meter are u guys using? from Hydroponics / Aeroponics read more

from Hydroponics / Aeroponics read more

Is using enzymes and uc roots (or pool shock) at the same time in my resevoir redundant or will it work? I'm using enzymes for what I believe to be stopping salt build up. But I have some dirty resevoir so I want to use pool shock to stop it. (Brown gunk on the walls and bottom sometimes. And a film on my pump) I use jacks321 which is relatively clean untell I add mpk later in flower. At which point salt city on everything. The enzyme I use (pond enzymes stage 2) makes it so it just... Enzymes and ucroots (pool shock) from Hydroponics / Aeroponics read more

Hi folks, Apologies for this being the second thread I have started on this topic, but the first one didn't answer my concerns. If this doesn't work I will try another way to figure it out. I am doing my first coco grow and I am in week 2 of flower. The plants look healthy (see pic). No signs of nute burn. I am using Fox Farm according to their guidelines, erring toward under fertilizing. My EC is running 2.6-2.7 on the inflow. The runoff is around 1.5, which I think is telling me that... Help! EC problem with Fox Farms nutes. from Hydroponics / Aeroponics read more

I've heard so many good things about this kind of system and that the EC and PH are kept uniform at all times. Would this type of system be good for someone new to hydroponics like myself or should I start with another system? from Hydroponics / Aeroponics read more

Just sharing a couple of pics of my first coco grow. It is super skunk and is week 7 of flower. I think she is coming along nicely but wanted some other feedback. I normally grow dwc but thought I would try coco and must say I am loving the results. Thanks for any replies. Happy growing to everyone. from Hydroponics / Aeroponics read more

Hey all, (novice grower here) I’m currently into week 2 of flower in my 4x8 tent and I’m going away in a month so I was thinking of setting up an irrigation system, I was curious as to if anyone would have some insight on if I should still water to runoff, or if smaller amounts will be alright for the time I am gone (10days). I have means to adjust temperature and humidity as their connected to smart plugs. I’m also curious as to if anyone would recommend getting a water chiller too or... Irrigation system from Hydroponics / Aeroponics read more

Need some help please, things have been progressing nicely through my grow. I’m still very much learning with only a year/4 grows under my belt. Changed out the res in my DWC (900ppm) ph5.8 temps between 68-73. With room temps 75-83. long story short I’m approaching 8 weeks since flip and one is looking real sad/limp droopy. What can I do to help her recover. She been getting worse since yesterday. Thanks for the help! from Hydroponics / Aeroponics read more

Opium cannabis seeds strain From: €26.00

Hi folks, I in the middle of my first time growing in coco (Super Skunk - week 2 of flower). This is also the first time that I've bothered with checking EC. I never checked it while growing in DWC and it never was an issue. Anyway, I just measured my inflow and got an EC of 2.6, my runoff EC was 1.02 and 1.05 in two plants respectively. I am a little baffled by this. Shouldn't my runoff be higher than my inflow? Also, the feeding chart (Fox Farms) says the inflow EC should be no higher... Question about EC and Coco from Hydroponics / Aeroponics read more

Sup everyone, got a question for yall.... can you help me identify if these are bananas or not? I included some overall pics of the plant as well. Info: lambs breath auto week 13 from seed day 56 of flower. from Hydroponics / Aeroponics read more

I've been growing NFT for eons. I know it. I know it well. I can run a 40 litre GT424 all day long in a 4x4 tent - I know how to keep the PH in control, and the Nutes. I'm well versed in it and never have root problems. Temps are UK temps and therfore easy to keep the tank/nutes at a reasonable temp. I grow cuttings and seedlings in a bubble cloner. I'm hitting a yield cap in my tent 4x4ft (it's actually an 8x4 but I use the other half for cloning/seeding). No matter what I do I currently... Thinking of going from NFT to DWC or RDWC - thoughts? from Hydroponics / Aeroponics read more

I'm wondering if this is from nutrient burn? The ppm was increased slightly from 550 to 650 (baseline of well water is 200 ppm). I wouldn't think that wouldve had such a big effect. They have been happy around 500-550 ppm (currently at 500 ppm)...See photos below: View attachment 1149806 View attachment 1149807 View attachment 1149809 View attachment 1149811 View attachment 1149812 View attachment 1149813 from Hydroponics / Aeroponics read more

I have a question. Im getting ready to start a grow and am putting together and ebb and flow setup. I have 3x3 Botanicare Tray Table 70 Gallon Botanicare Reservoir and the Ebb & Flow 3/4" Fitting Kit My question is this, for those of you who have set up one of these systems, how big of a hole am I supposed to drill for the flood and drain fittings? Like stated, they are the 3/4" fittings Websites say 1-3/8" One hydro shop told me 3/4" one hydro shop said I can use a hole anywhere from... Botanicare Ebb & Flow Fiitting Kit Question from Hydroponics / Aeroponics read more

Mexico legalize recreational cannabis july 2021

It’s been a few years since my last grow. I’m going hempy again because that’s what I know. I’ve always used botanicare but I’m curious if there is anything better out there. Thank you for your time from Hydroponics / Aeroponics read more

I'll try to keep this brief, I was looking to put together a RDWC setup in my spare room, I was going to so a simple setup like the one below 4-8 Gallon pots ScrOG etc. 2 1/2 months harvest. I had a friend tell me to try something like the first pic below (please excuse my attempt my MS Paint skills aren't that great lol) 4 plants per 27 gal tote RDWC smaller plants quicker harvest, he still wants to ScrOG to some extent apparently, but does that not defeat the purpose of SOG? not to... RDWC setup from Hydroponics / Aeroponics read more

Howdy Folks, I wanted to see if the community would be able to offer some guidance with an issue that I've been having. Here's my set up: 2 Plant site 3 bucket RDWC, res is external to tent. Total working capacity of the system is about 16 gallons. Tons of air 400 gph inline pump 260w HLG RSPEC light General hydroponics nutes using LUCAS formula (1 part micro to 2 parts bloom) 2 ml gallon calmag 2 ml gallon hydroguard RO water starting at 0 ppm. Res changes every week growing Tropicanna... RDWC - Res PH tanking after res change from Hydroponics / Aeroponics read more

I’ve got a flood and drain setup and I set the pH to 5.8. The plants were growing slowly and they had deficiencies even though I was using good nutes. I let the pH drift to 6.1 and the plants started growing better. Is it possible that some plants prefer a different pH than the standard 5.8? I made sure my meter was calibrated correctly. from Hydroponics / Aeroponics read more

Spider farmer officail website and products - led cannabis grow kits and lights : Free advertising platform for anything cannabis related from hps lights to dank wax

Cannabis strain grow reports and reviews 2021

I’m in the end of week 6 start of week 7 flowering Hydro rdwc Using r/o water I’m changing out old water for fresh water In a day and I plan to stop feeding the base nutrients. I’m still using 2 boosting nutrients up until week 8 maybe 9 depending on when they are ready. My question is When Should I stop using ph? Should I continuing worrying about ph levels? looks like these have another 2 or 3 weeks to go[ATTACH type="full"... Late flowering ph question from Hydroponics / Aeroponics read more

I have a plant growing in a 3 inch netpot and I want to transplant it to root spa bucket which has a huge 10 inch netpot. I won't take the plant out of the smaller netpot. Rather I intend to just sit the smaller netpot inside the larger one with hydroton surrounding it. The problem is that there are already good amount of roots coming out from the bottom. Will they be damaged if I just sit the roots between a little hydroton and then place the smaller netpot carefully? Or should I just... (How) can I transfer a plant to bigger netpot? from Hydroponics / Aeroponics read more

What ending the federal marijuana prohibition could mean for the industry - ABC News : Free advertising platform for anything cannabis related from hps lights to dank wax

#tattoo anyone ? - #drunk games for life Not a tattoo :/ Dude gets branded with hot iron for being a snitch rat - pur rata https://korrupt.tv/post/526 - post : #tattoo anyone ? - #drunk games for life Not a tattoo :/ Dude gets branded with hot iron for being a snitch rat - pur rata https://korrupt.tv/post/526

Decided to attempt a 3d Printed undercurrent Hydroponics system (UC RDWC) , as they are very good systems but just cost a stupid amount of money. It seems that things like the large tank connectors realy drive to cost up. i also seem to have collected a lot of filament that i can use to print most parts except the 110mm pipes and the quality square buckets i found. PETG fillement costs about £15/16 for 1kg and can print 2-3 massive fittings for that if not more. im... 3d Printed undercurrent Hydroponics system (UC RDWC) from Hydroponics / Aeroponics read more

So far this whole grow I would change my res or I had notes and the pH would gradually go up now it has begun to go down and I'm having a hard time getting it over 5.5. this must mean I'm experiencing some root rot or something similar, correct? from Hydroponics / Aeroponics read more

Outdoor growers are heading inside now so I thought if might be a good time to start a thread on how you can harvest a pound every three weeks from a 7x8' closet. I'll take you through my process from start to harvest. What is different about my system vs. others? 1) 3 separate Aero/NFT flower systems allow me to run a 9 week flower cycle. This allows the buds to fully ripen and also allows me to run strains with more Sativa in them. 2) I... Harvest a Pound Every Three Weeks! from Hydroponics / Aeroponics read more

i just ordered some advanced nutrients voodoo juice. i have a dwc bubbler system and this voodoo juice appears to be the perfect thing to really help all those root clusters thrive even more than they already are. Voodoo Juice | Advanced Nutrients | Root and Yield Booster anyone else using voodoo juice and have any pro's or con's with it? from Hydroponics / Aeroponics read more

HI guys, I'm ready to start my first grow. Should i start with hydroponics or aeroponics or both? Also What stores do you recommend for me to by my supplies? from Hydroponics / Aeroponics read more

I know I have seen threads on using bleach instead of h2o2 in hydro, but can not find the per gallon recomended dose. Fatman? from Hydroponics / Aeroponics read more

New cannabis strains 2021 - Sunset Paradise From: €32.00 : Sunset Paradise cannabis seedsFrom 3200Gelato TwistSunset Paradiseis an indica dominant hybrid that has its own distinct personality A very quick finishe, Cannabis Seeds

I add southern AG gff every time I top up my rez. Is this wasteful? Will the existing population of good bacteria left in the rez make up for the addition of new rez water? Should I only add when completely changing and cleaning rez? from Hydroponics / Aeroponics read more

I wanted to know what in-line water pump everyone’s using that’s been reliable? I’ve been searching for a couple days and I’ve been reading reviews that seemed to be mixed. I’m looking for a good 400 GPH pump that people have had success with. I want it to be an in-line pump so I don’t have to put it in my res bucket. from Hydroponics / Aeroponics read more

Ok, running an aero system my pH keeps rising. I know that as plants eat nutes pH will go up, but not this fast. Plus she's not even sprouted yet. I've noticed condensation in my airline and thinking this is the culprit. Gonna install a water separator, and hope that works. Anyone else had this problem? Of so, what was the cause/fix? from Hydroponics / Aeroponics read more

Cannabis Grow Reports -- El Dorado OG new strain 2021 : Grow Report El Dorado OGHefty resin monster acts as a bad mood killerEl Dorado OG was released in the spring of 2020 Key features of this indica dominant stra, Cannabis Strains

Hey guys I have a small autoflower plant in a 3,6L pot, way to small I know! But it was a free bee haha! I bought autopots for my next grow 15L. So I had the great idea to install my 3,6L pot in the autopot tray to make it as big as possible! Well it worked great, the float worked well and filled the tray with water, 2 days ago. And when the tray was empty it filled it up again! So no problems yet! but this morning I woke up to check out my little girl and I see some small tiny fucking... Autopots almost hydroponics haha! Springtails from Hydroponics / Aeroponics read more

Pure Pressure Longs Peak Rosin Press $7,995.00 : Free advertising platform for anything cannabis related from hps lights to dank wax

Looking for opinions about using nutes for seedlings. The water I use is ro that has ec of 0. Lot of people saying don't use nutes aon so young of a plant, but this water is sooo pure I'm think maybe a VERY LIGHT dose of the solution I have mixed for veg. Any thoughts? Growing in Rockwool in an aero system. from Hydroponics / Aeroponics read more

hiya all, Looking to expand from a typical 3 part to some additional additives to ensure I get the best grow possible. I've grown some pretty hefty 4 oz autos before using nothing but grow micro bloom so I know they're not essential, but im wondering what sort of magic secret you might have that you wish you had started doing years ago! Overall im looking to learn, not just a quick fix, so general theory/nutrient types would be way more interesting and informative to me than just... Best/most essential -supplements- for a dwc grow? from Hydroponics / Aeroponics read more

Hey folks - I apologize if this topic has been beat like a dead horse several times over but I'm preparing to run my first hydroponic set up. I've got a few fellow growers near me running different types of DWC setups and I'd like to ask the general masses here at RIU to guide me in the right direction. So I'll be running a 4x4 tent with 600w HPS. I was originally thinking a RDWC system consisting of a res and 4 bucket sites. Nice and simple but you've also the need for an air pump... DWC vs RDWC - First time growing in hydro from Hydroponics / Aeroponics read more

Hot stoner chicks : Free advertising platform for anything cannabis related from hps lights to dank wax

paradise seeds amsterdam -- cannabis seeds online to buy : Buy cannabis seeds europe

Hey guys, I’m nearing the end of my vegetative state of my first hydro grow. Plants are doing wonderful this far. But i do have a question about the end of my flowering phase flush. I’ve found a few different things with a quick google search, some do two weeks out, some do two days out. Some use nutrients and some don’t. Most forum posts are from 2018 and later. But I’m just looking for some guidance, that way if i need to buy something i can get it here with enough time during the holiday... Nutrient Flush from Hydroponics / Aeroponics read more

Okay friends please help me out, I've tried to research on my own but either the advice has too much jargon for the newbie that I am or it's not advice tailored to my grow. Details To know... Mars hydro LED Pro-mix HP medium mixed with 30% to 40% worm castings (most have suggested that's a bit much...) Using a 3-1-3 nute (iguana juice, switching to bloom at flowering stage) Packaging says mix 4 ml per liter per so I do about 14-15 per gallon but the more I read the more I hear people... Pro mix HP feed and water schedule from Hydroponics / Aeroponics read more

Just thought i'd share this. PH'd my water prior to hydroton and after and noticed it had raised my ph. i thought they advertised hydroton as ph balanced? from Hydroponics / Aeroponics read more

I have recently learned that pro growers/alchemists advise to feed mag sulfate and potassium sulfate for added terps. Given my current flower nute, I would like to ask advise about how much to add of those other chemicals. Anyone can please advise? from Hydroponics / Aeroponics read more

Good evening rollitup family! I'm towards the end of my first grow after a 7 +/- year hiatus. While some things have come back to me like riding a bike, others still elude me. It's been a re-learning process, if I do say so myself, but I'm excited to dive back into it. The method that suits me best and what I'm currently running is a DWC system with 5 gallon buckets and regular tap water. Prior to my hiatus, I grew for roughly 10 years, the majority of which was in soil and self taught... Simplest, yet most effective hydro nutes from Hydroponics / Aeroponics read more

So, if you read my thread https://www.rollitup.org/t/almost-lost-her.1056798/ It will bring you up to speed. Well, in my infinite wisdom I decided to move my portable ac unit inside the grow tent thinking that it would run more efficiently, as well as being able to use the units on board thermostat for temp control. Well, these were both true, and things were going very well.........until. Saturday July 3rd around 9pm, after having been celebrating 4th of July weekend with a few... And she's gone from Hydroponics / Aeroponics read more

you all been amazing on here with advice guys. but i got another question for you if using a NFT system and you growing in rock wool cubes i be using the 3 inch ones for cuttings. i understand you got to have a prolific root system coming out of the cubes before you put them into the tank. but i have been told any light that hits the roots the cuttings will be no good. so how do i protect the light from hitting the roots and destroying the cuttings. ive got a 200w cfl light to bring the... NFT systems from Hydroponics / Aeroponics read more

Tommy chongs choice - auto kong 4 - From: €9.50

Badazz Cookies OG Feminised Seeds Seedsman : Badazz Cookies OG is a three-way hybrid comprised of BadAzz, OG Kush and Cookies Kush Genetically, it is 70 indica and produces high levels of resin and terpe, Cannabis Seeds

Cannabis Grow Reports -- El Dorado OG new strain 2021 : Grow Report El Dorado OGHefty resin monster acts as a bad mood killerEl Dorado OG was released in the spring of 2020 Key features of this indica dominant stra, Cannabis Strains

korrupt.tv on Twitter: "#monitize your #videos with banners from various companies around the world, you get paid for sales and will be notified, your clicks show in your settings -- https://t.co/p6SC83dZBv" / Twitter

The snack #assassin - #animals are #crazy - post : The snack #assassin - #animals are #crazy

Hey guys, This is my first time doing Hydro, and things are going great, im using Current Culture H2O nutrients line with Bud Boosters Early and Late and also using Reverse Osmosis water. I have a custom built RDWC intermittent pump for 15 mins on and 15mins off to mitigate the heat issue. Its a 3 pot system 2 x plants and 1x reservoir, im growing an AK47 Auto and a White Widow Max Auto. Both are in week 2 of flower. My problem is I changed the water and flushed the system 2 days ago and put... RDWC Bacterial Growth CAN IT BE SALVAGED ? from Hydroponics / Aeroponics read more

Running a mycorrhizae pro mix porosite. Mars hydro LED. Iguana bloom juice and calmag for nutes. Made several mistakes in the process but proud to have gotten this far. How many weeks away do you think this is before harvest? I see that I have nutrient burn so I'm working on my ratios and feeding times more. Any suggestions or feedback based on what you see? from Hydroponics / Aeroponics read more

Hey everyone. I started using this line of food for my DWC grow, I have been on the Cyco nutes for a while and felt like switching it up. I was attracted to the pH perfect line because I work away from home quiet a bit and my neighbour (non-420 smoker) loves taking care of my plants when I'm away but I'd like to ease the burden on him and myself. Now I am not having any issues with the AN line but I am curious on a few things and anything yall might do with this line. 1. Do you add cal mag... AN 3part pH Perfect Nutes from Hydroponics / Aeroponics read more

This is not a sterile Deepwater conversation so kick rocks all you H2O2/ bleach guys. I'm trying it for the first time. Just added molasses to my rdwc and Orca. Does anyone else have experience in this. I keep seeing the famous Heisenberg recipe uses molasses. So I decided to give it a try and feed my bacillus ... I'm nervous as I imagine jons getting an STD check but excited too like I just stopped into a whole new level of dwc from Hydroponics / Aeroponics read more

after looking into the fast fit outside dimensions are 41.5 x 41.5 inside 39.5x 39.5 allowing it to fit a 3x3 table but not enough to fit in the tent itself....is there a table stand that does fit or is diy my only option....anyone have a fast fit 3x3 stand in a 3x3? tia switching to floraflex and with the res under the table being my only option as im cutting it tight on space this is the dilemma im dealing with. from Hydroponics / Aeroponics read more

Hello fellas! I want to try my first time ever Hydroponic in outdoor. A DIY ebb and flow. I am trying with the water pump, and need 10 min to refill the 5 buckets. Its a 4W water pump. The system needs around 7 minuts to drain. So this is around 17 minutes. It´s a lot ? The system will be placed in outdoors, under the sun. Very hot, all days over 91F /31ºC Tomorrow over 104F / 40ºC I have another question. How many times at day, must refill the buckets? Thank you all in advance and... How many minutes refilling the buckets in ebb and flow? from Hydroponics / Aeroponics read more

All was good and then plants just started tipping... 1’ to 3’ to 5’.... idk I changed the water and added some Hydroguard but it’s just wierd.. any thoughts on what it could be..? Trips me out.. from Hydroponics / Aeroponics read more

It seems the plants will just die and dry up if I keep the water level low like how a lot of people are saying.. almost all the plants I’ve ever grown are like 90% submerged in water.. Do I have to like lower the water and just let them get adjusted and acclimated to it and then keep them on that route..? from Hydroponics / Aeroponics read more

I've been running GH's maxi grow and bloom for about a year and a half. I was mixing my fertilizer on demand the day of watering up until recently when it became advantageous and highly convenient to keep holding reservoirs of premixed solution on hand. Within 48 hours the reservoir would go cloudy forming white precipitate. By 72 hours the res was completely trashed. I've tried multiple solutions to remedy the issue and have since given up. I need a fertilizer that's stable. With that in... Just switched to Jack's 5-12-26 with great results from Hydroponics / Aeroponics read more

This was left under the sink when we bought our house. Is this the type of filter I need to filter out chlorine? from Hydroponics / Aeroponics read more

So it's day 31 and just before the day 21 strip I was noticing my leaves were going light green on me so I added 25% mag to my feed because I run leds. Before flip everything was green lush but after stretch that's when I began to notice it but I thought it was because of the red in the spectrum it was an illusion of color. That's also around the time I noticed my ph was dropping from 5.8 to 4.4 and ppm rising from 950 to 1000 over 24 hrs.. so I started phing up to 6.3 and only adding back... Ph keeps dropping rapidly from Hydroponics / Aeroponics read more

High all!! I am having problem with calcium deficiency in my coco grow, and unfortunately I do not have access to calmag, not even mail order... I've tried dolomite lime mixed on my coco which only caused lockout issue due to ph problem. I got rid of the dolomite by flushing with shitload of water... So I know dolomite won't work.... Does anyone have any experience with adding gypsum to coco?? I've been told that it will work on coco and gypsum will not affect ph like dolomite does. TIA... Gypsum in coco from Hydroponics / Aeroponics read more