Best free roulette tracker tools 2025-2028

Hello, I am curious to know how the Wilma system works mainly in terms of solutions! How often do I have to add the solutions? Do I have to measure EC and PH every day to correct it? Are there 15min of 3 to 4x a day that the system has to be activated? How often do I have to add more water? from Hydroponics / Aeroponics read more

Hey guys, Im thinking on tackling a grow using grodan 1/4"grow-cubes, mixed with a little bit of small hidroton bits, as a medium, in regular pots. Any experience using them? I'm wondering how is the water perfusion, thinking about using a dripper in each pot, going for SOG using 1 gallon pots. will the water perfuse well and spread out even thoughout the bits? Any experience using them? from Hydroponics / Aeroponics read more

I've been growing NFT for eons. I know it. I know it well. I can run a 40 litre GT424 all day long in a 4x4 tent - I know how to keep the PH in control, and the Nutes. I'm well versed in it and never have root problems. Temps are UK temps and therfore easy to keep the tank/nutes at a reasonable temp. I grow cuttings and seedlings in a bubble cloner. I'm hitting a yield cap in my tent 4x4ft (it's actually an 8x4 but I use the other half for cloning/seeding). No matter what I do I currently... Thinking of going from NFT to DWC or RDWC - thoughts? from Hydroponics / Aeroponics read more

Hi all I really like the redused veg time hydro gives Can any 1 help me with an easy diy 4 pot system Cheers from Hydroponics / Aeroponics read more

The indoor and outdoor skillsets are quite different. I'm moving to hydro for the first time over winter. I know all about the requirements (environment, food, ph, etc.). I'm looking at Active Aqua's Grow Flow for indoor in two tents one for veg, and one for bloom. Does anyone have comments on Grow Flow? from Hydroponics / Aeroponics read more

Hey Guys, just wanted to share my first grow ever, and it was a massive success. I had 3 fastbuds gorilla glue autos. The main 2 took a total of 106 days and the ‘baby’ I had to chop early on day 89 so I could use to tent to dry. Total I yielded 1 lb 3oz (2 oz back left, 7.5 oz front left, 9.5 oz right side). Onto some mephisto beans for the next one! Setup: 3 5-gallon bucket rdwc. 3x3x6 ft tent. Mars hydro tsw 2000 (300 watt) light. Advanced nutrients 3 part plus, big bud, bud candy, b52... >1 lb first grow 3x3 tent!! from Hydroponics / Aeroponics read more

Ok so been troubleshooting this issue for a while. First thought this was over watering issue then noticed there were tons of bugs beneath the surface that appeared to be root aphids... ran captain jacks through them and still waiting for this to take effect. My older girls are almost completely yellow and the new seedlings look like there about to die. My ph is 5.8-6.0 in coco with ec at 1200 or 1.2 But something else I noticed... same plant food as last time and coco and watering method... Silica from Hydroponics / Aeroponics read more

Hello, So i need some help.. I built a 4 site system (Under Current design). 5 Gal round connected with 1.5inch Sched. 40 pipe. My return line is 3/4 with a 400gph pump. My flow is good and no leaks.. My issue is my (Res./Control) bucket is no where near the same water level and the 4 sites. All sites are leveled and follow suit when recirculating or even draining. Why is my Res. not the same water level? Should i use a 1/2 return hose or Ball valve to slow my Res. to the system? Im hella... RDWC system help!!! Please.... from Hydroponics / Aeroponics read more

Greets all I'm new here hope to contribute as best I can, have had many successful crops though so I'm not quite a newbie. Question for you hydro/aeroponics folks: Anyone ever run into an issue where water pump impeller vanes keep breaking? They all seem to be made the same, crappy plastic impeller with 5 or so vanes on it. Mind you I don't expect my pumps to last forever, but none of them seem to last a full year. Never ran dry, 3 separate pumps to ensure not overloaded, also to not have... Pump impeller vanes keep breaking from Hydroponics / Aeroponics read more

Ok so I am growing in coco for my second grow. For the first coco grow I followed a technique of frequent fertigation watering three times a day. This worked very well but it was started with larger plants so I think they were able to breathe better. This grow I was doing the same thing and noticed plants were growing slowly and were showing signs of yellowing and dying leaves of older leaves. Thought originally this was phosphorus def. Increased phosphorus and the plants seemed to recover... Coco and overwatering from Hydroponics / Aeroponics read more

Welcome to potads cannabis products advertising platform

Baby Kiwi strain : We have all cookies products at our store and website visit at Cookiessfhaightstcom, Cannabis Strains Los Angeles

Today marks 14 days since pop. The pictures were taken yesterday (day 13). I'm growing in 80% coco 20% perlite in a 5 gallon fabric pot. Grow tent conditions stay around 83F and 60% humidity. I wasnt watering until runoff until 2 days ago which was the last watering, the coco has stayed moist so Im holding off watering. I was feeding full strength advanced nutes for coco and suspected nute burn so I flushd with just distilled water and have been spraying calmag foliar spray to leaves once a... Trying to diagnose last week - no improvement or solution from Hydroponics / Aeroponics read more

I'm really uncertain whether or not to use GH Final part (aka Ripen). A lot of growers say that is a bad idea as it give an artificial taste to the weed. Some others say it's working well.I used it in my last grow and I didn't notice any bad taste.Can someone please give me his opinion preferably based on his experience. Here my diary: https://growdiaries.com/diaries/117738-grow-journal-by-jalbit thanks a lot from Hydroponics / Aeroponics read more

I´m having difficulty to stabilize the PH , is coming up . There's any way to stabelize it? Thanks from Hydroponics / Aeroponics read more

i wanted to know if diamond nectar/kool bloom and floralicious bloom and grow are worth buying also from Hydroponics / Aeroponics read more

Hey everyone, back from the garden with an update: My lamb's breath auto is experiencing some root rot and need advice on how to manage. I think I've caught it early enough since it wasn't looking like this 2 days ago when I last checked in. Set up: DWC 5gal bucket Air stone Phlizon LED lights 4x4 dehumidifier humidifier intake + exhaust fans 2 oscillating fans nutrients: 1/4 strength recommended nutrients gen hydro flora series plus additives (calmag, hydroguard, flora nectar,diamond... Root rot and weird stuff from Hydroponics / Aeroponics read more

Hey guys Maybe I'm being a little ambitious but for my latest project I'm trying to grow 4 plants in one 70L DWC. 2 of them are Humboldt Blue Dream CBD (the ones on the right) and the other two are Dr. Seedsman 30:1 CBD (the sick looking ones on the left). In the following pics you can see the Blue Dream CBD is doing alright but the Seedsman is not doing well http://imgur.com/a/EFIySZI Other info about grow: Using 4 qb288 panels approx 2.5 feet above plants - Was only using 2... Trying to grow 4 CBD plants in one DWC from Hydroponics / Aeroponics read more

Horticulture Lighting Group HLG 225 - best led grow lights 2021

Hello all I am using flora trio as my base nutrients with some cal mag, hydroguard and cannazyme in a 2 plant(skywalker OG femenized photos) 17 gal DWC reservoir. This is my first ever grow and I’m growing in a 4x4 tent using 2 HLG 260W XL with a uva 30 bar in the middle of them. Reservoir temps are pretty steady at 65-67 degrees with ambient air temperature around 68 with lights on. RH just above the reservoir is 55 and above the canopy is 57. Will post some pictures for you below. **(very... How can I add liquidkool bloom and floralicious plus to nutrients without giving nutrient burn? from Hydroponics / Aeroponics read more

Hey guys, i am new to growing and having some difficult getting to these two answers made a ebb e flow setup with hydroton, its working nicely, got 2 mother plants ready to take cuttings from and make clones, i plan to put these clones into the system and straight in 12/12 as soon as the roots are ready, only chasing after the main cola in lollipop style, the two things i am having difficult getting an precise answer are: How much space each plant needs in a setup like this? 4x4" is enough... Need some help in my ebb e flow parameters from Hydroponics / Aeroponics read more

So general hydroponics has a new feed chart. Im not familiar with the new chart. I’ve been using the old feed chart for the flora series, drain to waste. the new feed chart doesn’t specify whether its drain to waste or re circulating. I follow the old chart at 1/2 strength then slowly work my way up with the old chart but this chart is different. Now they have a basic 3 part flora trio chart and then an advanced chart wich adds calimagic and florliciousplus along with kool bloom when in... New general hydroponics feed chart from Hydroponics / Aeroponics read more

At first thought it was light stress since I just switched to their big lights. Doubt it’s root problems since they’re not drooping? Coco coir, air pots, 1000 watts led , 85 f 37rh. Top leaves taco’d which gave the impression its light stress but as you can see some leaves in the bottom are affected but middle ones are fine ? from Hydroponics / Aeroponics read more

Anyone use masterblend as their base through the whole grow? I haven't been able to find any good info so I just took an educated guess and swapped out my calcium nitrate and epsom salt for calmag and mkp. from Hydroponics / Aeroponics read more

Trying to set up a kratky system wondering how many nutes to start with and at what time can I transfer seedling to cups just asking for a basic feeding schedule from Hydroponics / Aeroponics read more

I’ve been growing with HPA for a while now and I was wondering if you other growers insulate your root chambers and your pressure tanks? Do you go as far as insulating your water lines as well in order to maintain a 68 degree water temp all the way through to the root chamber? I was having some issues with my new chambers with nutrient uptake and deficiencies. Come to find out I was getting light bleeding through my chambers and they also felt way to warm. I have recently fixed those issues... Do you high pressure aeroponic growers insulate your pressure tanks? from Hydroponics / Aeroponics read more

First time grow. I germinated the seed directly in coco and it popped 8 days ago. It has been seeing some really good growth. Even though its coco I haven't been watering much because it doesn't get dry. I was watering with what I thought was 5.9 PH water but I calibrated my meter today and the water Ive been giving is around 6.8. New batch 5.8 PH tap water with like 260ppm. Got it in a grow tent with 100w LED's about 30 inches from the top. Cat pissed in my coco in the pot I had outside... Day 8 - When Should I Start With Nutrients from Hydroponics / Aeroponics read more

Where are all the autopot users???ets see what you've got!!! I need some inspiration and motivation!!! from Hydroponics / Aeroponics read more

This plant was my original female that I took clones from and has been in flower for about a month and a half. I had some highs and lows with her and I think the lows are really showing their face right now. It is starting to hermi due to my unprepared actions and was wondering if it would be worth harvesting now or continuing to keep it in flower. I bought a tent and tried to have a light and dark side. Put a black double layer bag in the middle of the tent and a mylar layer on the... Harvest to save something from Hydroponics / Aeroponics read more

Hi all; I have a question about different ways chiller are made and what you all think are the better to best ones. Made in USA preferably. I’ve seen some with in out pipes on side front back top and bottom. A majority of the home aquarium or active aqua hydro Chinese ones are on top. I have bought 2 new active aqua 1/4hp both arrived dead so back to the drawing board. Done with that. Does the exchanger mounting way make a difference other than what way it can be setup and air discharged... Chiller questions from Hydroponics / Aeroponics read more

Hey everyone! Just thought ide make a post here about mixing a reservoir with the flora pro nutes. i saw one thread on here from earlier this year, however they didnt really touch on what im wanting to know. What does the grams/gal work out to when you factor in dilution in the stock tanks and then dilution of the stock nutrients for feeding etc.... i dont really want to have 3 25 gal barrels in my garrage. I know theres a mathematical formula to it all but my adhd has been kicking my ass... GH FLORA PRO in ebb and flow, grams/gal from Hydroponics / Aeroponics read more

Why you should use coir peat and coco chips After many researches undertaken by the scientists and agronomists all over the world, it has been found as to why you should use coco peat as substrates. Excellent Air porosity Coco peat maintains excellent air porosity in the substrate at the roots growing area giving healthy plants with faster growing and it leads to have high yield in the end. Excellent water retention Lignified cocopeat gives... Coir Products from Hydroponics / Aeroponics read more

Hey all i recently set up a floraflex watering system.. At first it all seemed to work fine then out of nowhere my air bleed valve started kicking out loads of water I went from maybe 500 ml at most to maybe upto 3000 ml + Any ideas what could be causing this? floraflex air bleed problems youtube.com [ATTACH type="full"... Floraflex air bleed valve problem from Hydroponics / Aeroponics read more

Hello everyone. First time grow running coco with perlite in a 5 gallon fabric pot. Actually germinating the seed in coco as of now in a solo cup and it just popped today. What I need to know is what nutes to being feeding the plant and when to start. Also should I be okay using my tap water. Its definitely "hard" water but I don't know the ppm. High PH too but im PH downing it to around 6. I just bought some Cal Mag but I was also thinking of getting some Canna Coco A & B from their... Nutes for Coco from Hydroponics / Aeroponics read more

I'm trying out my first "main line" (I think) and am having pretty good results with a single plant getting a large canopy. Was wondering on anyone else's experiences. I'm using 5 gallon bucket DWC so I'm LST'ing with clips from Hydroponics / Aeroponics read more

Been back and forth on running an autopot or drip system in a second grow room of mine. I've been concerned about salt buildup with auto pots so have been leaning drip. I'm trying to find some of the benefits to running autopot vs drip emitters and am coming up short. So, autopot users, I ask you this: Why did you choose to go with autopot over a drip system? Have you had any major salt problems in the media? Any workarounds? from Hydroponics / Aeroponics read more

Assassin takes out 15 Taliban isis terrorists with a silencer and a back up of 5 men

New cali cannabis seeds 2021 - Tangerine Sorbet

Hi guys, I have decided to switch over using sterile system using H2O2 as the sterilising agent at 35% ~1ml/L twice a week. I am wondering what nutrients, additives, are compatible with sterile hydroponics? My plan will be to use Canna base nutrients with no other additives. What works with sterile? Do Fulvic/Humic acids break down with H2O2? What about enzymes like Rhizotonic? What other additives should be avoided with sterile Hydroponics? First post, thanks to everyone here for sharing... Sterile Flood and Drain, compatible nutrients. from Hydroponics / Aeroponics read more

I love the root pr0n. post yours up please.. aero, plugs, RW, cup 0' water from Hydroponics / Aeroponics read more